端子机刀座与刀片 厚10-15mm 线径2-14mm JW-BL05
端子机刀座与刀片 厚10-15mm 线径2-14mm JW-BL05 Thumb 端子机刀座与刀片 厚10-15mm 线径2-14mm JW-BL05 Thumb 端子机刀座与刀片 厚10-15mm 线径2-14mm JW-BL05 Thumb

端子机刀座与刀片 厚10-15mm 线径2-14mm JW-BL05

📅 2025-04-25 👁️ 231
  • 产品型号: JW-BL05

  • 规格参数

    刀座厚度: 10mm, 14mm, 15mm
    刀芯尺寸: 9*8, 10*10
    槽深度: 7.6mm
    适用刀片类型: 圆刀, V刀, 平刀, 切刀, 对接刀
    适用线材外径: 2.0-14mm
    机器配备刀片: 一套2件
  • 立即询价

JW-BL05 为端子切刀座与刀片组:包含固定切刀的刀座、刀片本体,以及引导线材进入切削的走线槽。适用于需对刀片定位并设定深度、而非简单夹持的端子机与线材加工工位。

刀座厚度有 10 mm、14 mm 与 15 mm 三种,刀芯为 9 x 8 mm 或 10 x 10 mm,与设备上的刀座孔匹配。走线槽深 7.6 mm,适用外径 2.0 至 14 mm 的线材。同一刀座可装圆刀、V 刀、平刀、对接刀与半圆对接刀,因此一个刀座即可覆盖剥线、平切与半圆切。刀座形式包括 U 形、V 形、OTP、806 与 2000 型,各款均可选带或不带切料带功能。

在走线槽磨损、设备改用新的线径范围,或刀座类型变更时采购。图示为 OTP 与 806 刀座的标准型与加厚型,并列出带切料带与不带切料带两种版本。

主要特点

1. 刀座厚度:10 mm、14 mm、15 mm,匹配不同端子机刀座。

2. 刀芯:9 x 8 mm 与 10 x 10 mm 规格,刀片可直接装入原有刀座孔。

3. 走线槽深:7.6 mm,适用外径 2.0 至 14 mm 线材。

4. 刀具选项:同一刀座可装圆刀、V 刀、平刀、对接刀与半圆对接刀。

5. 刀座形式:U 形、V 形、OTP、806 与 2000 型,分标准与加厚两种。

6. 料带:可选带或不带切料带功能,下单时指定。

技术参数

参数规格
型号JW-BL05
品名切刀座与刀片组
刀座厚度10 mm、14 mm、15 mm
刀芯9 x 8 mm、10 x 10 mm
走线槽深7.6 mm
适用线径外径 2.0-14 mm
刀具类型圆刀、V 刀、平刀、对接刀、半圆对接刀
刀座形式U 形、V 形、OTP、806、2000 型
切料带功能可选带或不带

应用范围

— 使用 OTP 或 U/V 形刀座的端子机:由刀座设定刀片深度的切断与剥线作业。

— 806 与 2000 型工位,分带切料带与不带切料带版本。

— 覆盖外径 2.0 至 14 mm 的线材加工线,一个刀座即可兼容全范围。

— 走线槽磨损的刀座更换,其表现为剥线深度不稳定。

— 新增线径范围或更换刀座类型时的配置,此时刀座、刀具与走线槽一并更换。

Cutter blocks: five-line, U-shaped and V-shaped large cutter seats in polished steelCutter cores: five-line, U-shaped and V-shaped versions standing upright with cutting edgesThree advantages of SKD11 cutter seats: imported steel, vacuum quenching, factory-direct priceOTP cutter seats with springs, one cutting the strap and one leaving it uncutOTP, 806 and 2000-type cutter holders, thickened versions with and without strip cuttingOTP and 2000-type cutter cores, cut-tape and no-cut versions side by sideU-shaped thickened cutter seat beside the stripping machine cutter seatFive-line and U-shaped cutter seats shown from front, side and backFive-line, U and V cutter cores with springs, front side back viewsOTP cutter seat front, side and back, 10 mm seat with 9x8 coreThickened OTP cutter holder, 14 mm seat, 10x10 core, 7.6 mm trough depth806 cutter seat without tape cutting and 2000-type cutter seat cutting the stripOTP cutter cores, cut and non-cut versions, plus 2000-type core with springU-shaped thickened holder and stripper machine cutter seat from three angles

就此产品向我们发送您的问题

未选择任何文件
支持 JPG / PNG / WebP,单张不超过 10 MB